Product description
DAP Screaming Eagle SXE FMW 2nd Gen Fit 62/68/14 T3 Non-Gated HX40SXE2G626814N40 is a step towards a performance turbo. It is still quick spooling and suited for 450-550HP (400-450HP for 1st gen) The 68mm turbine wheel will spool relatively fast and will be a great all around turbo for performance, towing and daily driving.The DAP Screaming Eagle SXE is built on the latest technologies from Borg Warner AirWerks® SX-E.
This turbo will support 450-550HP depending on elevation and turbine choice and flows approximately 77 lbs/minute. By comparison the stock HX35w turbo flows about 52lbs/minute and will support about 325HP on a 94-02.Injector recommendations for a 1998.5-2002 with a big programmer would be 125HP- 175HPInjector recommendations for a 1994-1998 would be 5x.012, 5x.013, 6x.011, 7x.010, 7x.011Injector recommendations for a 1989-1993 would be 5x.012, 5x.013, 5x.014, 6x.011, 7x.010, 7x.011Detailed Build of DAP SXE2G626814N40:• BorgWarner Part : 13009097056,S300SXE 8376 (S362) Compressor Wheel Details:• Compressor Inducer: 61.44mm• Compressor Exducer: 83.47mm• Compressor flow: 77 lbs/minute• Compressor outlet is machined for the 2.91″ flange found on 1991.5-2002 Dodge• Compressor Inlet: 4″Turbine Wheel Details:• Made From Heat Resistant Inconel 713C• Turbine Exducer: 67.56mm• Turbine Inducer: 76.2mm Turbine Housing Detailed Description: • Turbine Housing Part : 14CMT3HX40NG68• Turbine Size: 0.80AR, 14cm2• Turbine Inlet: T3, Divided/Twin Volute, Non gated• Turbine Outlet: HX40 4.0″• Actuator: Not applicableOther Features:• 360 degree severe duty thrust bearing • Integrated speed sensor port • Pre-machined boost port • Optimized compressor stage aerodynamics
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov
The above warning is being provided to comply with the State of California’s Proposition 65.
Features
Additional information
Items Needed for Install:• HX40 4″ Downpipe• HX40 Clamp• 4″ Turbo Back Exhaust• 1989-1993 will need to purchase a new oil inlet fitting or a new top oil line (recommended)• (Recommended) Flexible Oil Drain Line for Easier Installation
Accessories Included:
• Oil Drain Gasket • 2x 3/8 Oil Drain Mounting Bolts • 2x 3/8″ Turbo/Manifold Mounting bolts • 2x 3/8″ nuts• T3 or T4 Turbo/Manifold Gasket
Reviews
No Reviews Yet!
